i wanted to see if it would give me less brown goo from the iron traces, i figured higher grade less contaminants.
would being magnetically charged hurt effcientcy? and if i sand blasted them that would remove the annealing correct?
400 series ?'s
17 posts
• Page 1 of 2 • 1, 2
Re: 400 series ?'s
by Looking In » Fri Jun 20, 2008 6:09 am
Rich (Looking In)
((((Is it really so difficult to tell a good action from a bad one? I think one usually knows right away or a moment afterward, in a flash of regret.)))) BOOM
((((Is it really so difficult to tell a good action from a bad one? I think one usually knows right away or a moment afterward, in a flash of regret.)))) BOOM
- Looking In
- Regular Poster
- Posts: 367
- Joined: Thu Dec 22, 2005 11:06 am
by hydroxrox » Sun Jun 22, 2008 10:22 pm
as i stated i have seen no magnetism, and if i did i don't see as how it could harm the cell.....
my cell as of now is this set up, i run tap water and no electrolyte, but on occasion i will add some soda ash, because thats what i have available to me. any suggestions on how to improve this design would be appreciated
my cell as of now is this set up, i run tap water and no electrolyte, but on occasion i will add some soda ash, because thats what i have available to me. any suggestions on how to improve this design would be appreciated
Hydrox Rox Sox
- hydroxrox
- Regular Poster
- Posts: 92
- Joined: Tue Dec 25, 2007 3:38 pm
- Location: utah
Magnetism is Good!
by SeaMonkey » Mon Jun 23, 2008 5:07 pm
-
SeaMonkey - Regular Poster
- Posts: 396
- Joined: Thu Aug 09, 2007 4:00 pm
- Location: Dystopia, USSA
by Hybrid » Wed Jun 25, 2008 10:39 pm
hydroxrox by what SeaMonkey states, magnetic is beneficial, I have to
say I should relook at the s/s I use myself.
Very handy to know SeaMonkey. Thankyou for your cell Tips !
Cheers !
say I should relook at the s/s I use myself.
Very handy to know SeaMonkey. Thankyou for your cell Tips !
Cheers !
--Anthony
-
Hybrid - Regular Poster
- Posts: 217
- Joined: Thu May 15, 2008 9:26 am
- Location: NSW Australia
17 posts
• Page 1 of 2 • 1, 2
Return to Hydrogen Production via Electrolysis
Who is online
Users browsing this forum: No registered users and 29 guests