OUPower.com

by **mos68x** » Sat Oct 21, 2006 2:14 pm

Well I took the plates apart to use them as a template for the 24 that Kevin gave me and I did notice that there was some slime on the cathodes and some of the white-ish coating on the anodes. I also noticed some of the rust colored looking slime coming from the stainless washers in between the plates. Since I bought more nylon spacers yesterday I'll try to use them to space the plates and avoid the stainless washers combined with the acetal washers. I also bought some stainess bolts to put in the assembly for the electrical connections. I just have to recalculate everything out since I'll be trying to get 7 cells to drop the voltage down. What I might do is just do a couple more cells that are 7 plates and just deal with whatever voltage drop I get, but I'll have to tear apart the whole assembly again anyways when I get more plates to put in it. OH...what to do, lol.

by **mos68x** » Sat Oct 21, 2006 10:00 pm

by **mos68x** » Mon Oct 23, 2006 12:57 am

by **glenn_aircooled** » Mon Oct 23, 2006 6:05 am

by **waterbard** » Mon Oct 23, 2006 8:59 am

by **mos68x** » Mon Oct 23, 2006 11:08 am

by **mos68x** » Mon Oct 23, 2006 12:08 pm

by **waterbard** » Mon Oct 23, 2006 2:40 pm

by **mos68x** » Mon Oct 23, 2006 9:00 pm

by **Bob Boyce** » Mon Oct 23, 2006 11:12 pm

by **mos68x** » Tue Oct 24, 2006 1:39 am

by **waterbard** » Tue Oct 24, 2006 8:41 am

by **Bob Boyce** » Tue Oct 24, 2006 10:35 am

by **ElectroGasMan** » Tue Oct 24, 2006 2:53 pm

by **mos68x** » Tue Oct 24, 2006 6:04 pm

OUPower.com

first time go? i hope so, lol

Won't Work huh?

Who is online