kevinsatterfield

[kevinsatterfield]

yeah and thers 2 of them stores here and the closer one hasnt had any in months and the one that had it was hid away from the other adhesives....Lowes hasnt had any here in months or homedepot down the road....but the people at the store today were really nice and ordered more. got ther last 4 tubes to get this hermanizer cell back together.An idea came to mind today and cant wait to try it out.Inspiration from you and others here gave me thought to this.....But i have a 2" s.s. nipple and a cap.I wanting to test a cell with another 2" s.s. nipple with a gap between the 2 at bout 1/8" with the lower nipple being anode.I have this clear tube'n that leaves bout a 1/8" gap between electrodes and clear tube'n around the outside with the water gap being inside.Wanna try pulsing the anode from the bottom with a herman type wire loop on the bottom.Something kinda like that but shouldnt be a hard xpieriment.Im still hang'n in there try'n to build someth'n.

Your system ther looks realy kewl....specially how the large bubbles form..looks neat.Hope to hear some more bout all that....Thanks again for the house hold tip.Im swear'n by it too as its the only thing held together my milk jug water tanks... Ive been busy myself withg work an all try'n to tinker around with stuff....by the time i get around to complete'n a project similar stuff oughtta be available at home depot or somewhere...lol .Oh yea just wanted to say thanks again for thr furnace project...I hope to fire that up and make some adapter plates soon or near soon.Its kewl yer show'n yer new designs....i was wander'n bout get'n a looksy at yer updates....Thanks again!!

[kevinsatterfield]

[waterbard]

[kevinsatterfield]

[waterbard]

[kevinsatterfield]

[waterbard]

[kevinsatterfield]

waterbard,

wat do you mean a single stranded wire over stranded wire?

I think i got the wrong coil for my set up,ive put 2 balast resistors on and they both get red hot.....ive got a 67k race'n coil made for high rpms and use'n the 7.5 hertz freaquency is just too slow i guess.Was really hope'n to use that coil ...gave 80 buks for it but ...you have any advice on that?Any way to make it work at 7.5?

[kevinsatterfield]

oh yeah i forgot ...im use'n a small ignition module....wuld the resistors cool down if i used something that could use more power like a FET or a higher out put transistor set up?

[mos68x]

hey kevin, i'm finally back home in the states. can i get your email address? i'd like to come down and see what you got cookin up. i'm up by clarksville so it's not that far of a drive.

[kevinsatterfield]

i be dern....why heck yeah......come on down.....gimme a call tomorrow.....the wife will be at work....lol im not allowed to have friends....lol she aint that bad but you know how it is i guess....anyways mail me at burnhydroxy on yahoo.I gotta run out in the mornning and try to find some copper flashing to hopefully make a shield for this emf.I cant get with in 5 feet of it ...the probes on my meter read the freaquency at the distance.Im fix'n to reseal the anode but should be dry by tomorrow.I had to use some crappy glue before i found some goop but its just the anode and no big deal to reseal it.Im kinda scerd to fire it up with out a shield on it.All of my serries cells are apart cept the one with weather stripping and bolts and it dont have a top on it anymore...but hey thats cool to have ya back home and all.....thanks for the sacrafice!!!

[Bob Boyce]

[waterbard]

[kevinsatterfield]

[Bob Boyce]