plate design

[brian]

[thrival]

[golden_guppy]

[thrival]

[brian]

what i was thinking was incasing copper,alum,plating,ect between each plate of a sealed series cell and if it may or may not help in conductivity.

[thrival]

Why is conductivity an issue? Just add more electrolyte.
Dissimilar metals will just electroplate unless you're
over-charging a home-made battery to also make hydrogen.
On the other hand if you want more surface area to make
more bubbles, less work, cost, machining & fussing, see
above. I wonder why batteries are made of plates. Coarse
granules through which electrolyte can permeate, should
make way more current

[brian]

a metal in between could absorb heat or possibly capacitor type effect that may help output.just a dumb idea i was thinking.thanks

[WaterFireHO]