New Meyer Type Replication

[Superman88]

Well Im finally going to do it. I have ordered all of the materials to complete my WFC and Im so excited. Mine will be a little different than the ones that have been on here so far. Im using 13 tubes made of 316L seamless tubing 18 inches long. It will be housed by a 6 inch diameter acrylic tube aprox 30 inches long. Ladies and gentlemen, Im going to be very open about this project and I hope that when I get stuck on something that I can rely on you guys for help. I have been a long time reader to this forum and I have learned a lot. This is a great resource.

[schkarlpaul]

Can't wait to see your progress. Good luck . Karl

[Superman88]

[Superman88]

[readyakira]

[chemelec]

[fixaze]

Some information....

http://en.wikipedia.org/wiki/Naoh

"Sodium hydroxide does not attack iron or copper, but other metals such as aluminium, zinc and titanium are attacked rapidly."

Saw somewhere a pic of someone soldering copper wire to an ss plate...solder was then covered with something like Goop?

They do make ss pop rivets. Copper ring connx riveted to an ss plate?

http://en.wikipedia.org/wiki/Electrical_resistivity

http://en.wikipedia.org/wiki/Solder

"Hard solder

As used for brazing, is generally a copper/zinc or copper/silver alloy, and melts at higher temperatures."

I was also wondering as to how much current was wasted getting to the functioning part of the ss plate.

[Superman88]