More H2-Paul Questions

[Bob Boyce]

[AlaskaStar]

[H2-Paul]

It must be dark up there in Alaska since common sense has not dawned on you. Although I am a trained car @ aircraft mechanic and have retired after several successful startups in silicon valley I am getting schooled by an hourly employee... That is most interesting part.

All this time, I have had simple questions which all of you seem to get very offended by. Pick one without being an ass. ( This also goes for the cheerleader on these boards - ElectroGasMan)

1) What are the BEST results you have had in gas production (Liters / Minute)

OR

2) Have you built a cell(s) that power a vehicle 100% (not supplemental - that is just a variable) If so, what and how..

OR

3) After many years, thousands of messages, tinkering by hundreds of engineers, scientists, mechanics (like your self) and general enthusiasts, - where are any tangible results. I have not heard of anyone that is powering a car on 100% hydroxy gas and if they say they do, - they don't share the results so it must be BS. As fas as I know, not even Bob has accomplished this & he seems to be the most knowledgeable . This is still a pipe dream....

No one here has EVER published (here or on any other board) a comprehensive plan, instructions, diagrams and technical results that are repeatable by the masses.....

Any reasonable TECHNICAL answer would be appreciated (keep your emotion to you self please)...

I WOULD LIKE TO FOLLOW ANYONES PLANS ! ! ! ! ! ! ! !

All the ones currently out there now don't work.......

[AlaskaStar]

Yes on running a vehicle COMPLETELY on Hydrogen Fuel (NOT SUPPLEMENT).

Litres per minute? How about calculating 114 Cubic Feet in 5 Minutes? I hope that's enough Hydrogen gas. I know for a fact that quantity of gas is too fast for even me to deal with properly at home.

Cubic Foot=1728 Cubic Inches, 3.8 Liters=1 Gallon and almost 7.4 Gallons can fit into a cubic foot......

Making Hydrogen is the Easy part. Making it Portable....Another Story. My process does NOT use Electricity, but is very awkward to implement in any sense of being portable. very high maintenance system, and very time consuming in preparation, and shut-down. the actual production is ungodly fast, and large.

AlaskaStar

[kevinsatterfield]

Paul, I havent seen yer project page yet.Do you have one?

[AlaskaStar]

I Have to agree....

H2Paul: Where is Your Project Page?

OH! as for Designs.....I PERSONALLY (IN PERSON) GAVE MRGALLERIA A SET OF PLANS.....

Check out his Project page.....

OH! Wait, Nobody published any full flans on the web, not even here.

My bad. Oops.

I guess the sun Hasn't come up. Too cold for anyone to think here. We are still in the Eternal Darkness of Winter....but come June 22nd....24 Hours a day of SUNLIGHT! Maybe then, I'll have plans ready.....or I'll be out fishing in Chitna on the Copper River and won't be within 300 Miles of My Computer. That would be a shame now wouldn't it.

So yes I agree, it's cold, and the sun isn't shining, My air conditioner broke, it's -15 and too darned hot right now. -44 to -78 F is where I like it.

[Art]

h2-paul
as a new guy (2-20-2007) i found it best to spend time reading some past post
i have spent close to 3000 hours reading past post on this site but i started to ask a bunch of repeative questions so from some advice started reading past post and WOW the answers were right there!!!!
now when i find myself asking a question i look to the past

I think these guys have been very easy on you for they have given you some of what you were lookin for butt now it is startin to get out of hand

and by the way AlaskaStar likes the dark as it helps to see his h2 burn when he gets his hands dirty fillin his own blanks in!!!
also the cold is needed to keep his high pro brain from overheatin

and if you do a search for Bob and outher greats that post here you will find much more than just chatter you will find tons of info that would far surpass the minds of guys like of many you may know!!!

guys sorry i just cant take this anymore had to speak up as i have spent hours on this site and dont want guys like this to drag the collective thinkin down to more repitive reading mark helped me not to do what has happen here

so in closing thanks a million OUPower

keep on kepping on

[nickle989]

Paul,

I can understand your frustration. Been there. This may go against the masses here but hopefully not.

If you would like to learn and produce a cell that will run an engine I will assist your efforts. It will only be a proof of concept ie. it will run an engine. As you live down there and I live up here you will have to make the cell and do the modifications to the engine yourself. Once you have it running you can then start to get into the efficiency of production.

I do not know how many here on this group have actually had an engine running on hydroxy gas but I do know that there have been a few.

[AlaskaStar]

[AlaskaStar]

[H2-Paul]

Hi Alaska.

I will try and stay on my site an mot disturb the rest of the participants..
I don't have a project page since I have not found any plans worth building, Just bubbling small amounts of hydroxy is a waste of time.. Other guys seem to have it and $$ to waste....

You mentioned in a post dated March 17th the following;


1 Cubic Foot=28.32 Litres.

114 Cubic Feet=3228.48 Litres.

Time index of 5 minutes.

That means I was Producing 645.696 Litres of Hydrogen PER MINUTE.

That translates (spatially) to 169.92 GALLONS (Space only) worth of Hydrogen, NOT COMPRESSED.

Can you Please, Please tell me how you accomplished this... I would like to know since this is the amount of gas roughly requited to operate a vehicle... You may also send me an e-mail with the answer to giallof1@gmail.com if you like...

When I find a cell, circuit and chemistry that is prommising, I will build it..

Thanks for all your help,
Paul