Mark , I missed something there.
I loved the Production [ output ] and the music, but I did not
see any way that was used to measure the Hydroxy.
Those integral bubblers are neat, although I tend toward the use of a
cheaper " disposable " safety device.
Very nice looking unit. Certainly making a Load of HydrOxy.!
Measuring gas
4 posts
• Page 1 of 1
by glenn_aircooled » Thu Dec 07, 2006 6:43 am
I am trying to build a very simple plastic ball in a clear tube device to
see if it can indicate slight changes in flow rate. This is something I will be
needing very soon.
-
I got the plastic ball, but making the tube is more difficult than I thought.
It needs to be a very slight taper. I bent a thin piece around but have
trouble joining it together so its round.
see if it can indicate slight changes in flow rate. This is something I will be
needing very soon.
-
I got the plastic ball, but making the tube is more difficult than I thought.
It needs to be a very slight taper. I bent a thin piece around but have
trouble joining it together so its round.
Glenn , See Ya.
-
glenn_aircooled - Regular Poster
- Posts: 572
- Joined: Sun May 21, 2006 12:21 am
- Location: Australia
by Looking In » Thu Dec 07, 2006 9:28 am
Rich (Looking In)
((((Is it really so difficult to tell a good action from a bad one? I think one usually knows right away or a moment afterward, in a flash of regret.)))) BOOM
((((Is it really so difficult to tell a good action from a bad one? I think one usually knows right away or a moment afterward, in a flash of regret.)))) BOOM
- Looking In
- Regular Poster
- Posts: 367
- Joined: Thu Dec 22, 2005 11:06 am
4 posts
• Page 1 of 1
Return to Hydrogen Production via Electrolysis
Who is online
Users browsing this forum: Bing [Bot] and 34 guests