What is it? Too ashamed to admit ya bought one?
Comparing a bought desulphator with a homemade one.
25 posts
• Page 2 of 2 • 1, 2
by resident_genius » Fri Mar 06, 2009 11:33 am
where is the line between tinkerer and scientist, scientist and madman, madman and genius?
http://resident-genius.com
'Nuff said.
Latest Endeavor:
http://www.youtube.com/user/SimonG2892?feature=mhw5
http://resident-genius.com
'Nuff said.
Latest Endeavor:
http://www.youtube.com/user/SimonG2892?feature=mhw5
-
resident_genius - Regular Poster
- Posts: 612
- Joined: Sat May 20, 2006 2:52 pm
- Location: New jersey
by mael » Mon Mar 09, 2009 3:12 am
I think the server must have been continuously overloaded so I haven't been able to read what experience others have had with so-called pulse-chargers bought from stores.
What is it? Too ashamed to admit ya bought one?
What is it? Too ashamed to admit ya bought one?
What has been won by the brave at great cost can be lost cheaply by fools and once gone can rarely be regained and only then at great cost.
-
mael - Regular Poster
- Posts: 366
- Joined: Sat Apr 22, 2006 10:20 am
- Location: Amami, Japan.
by redriderno22 » Tue Mar 10, 2009 9:35 pm
WoW drank too much tonite........................................................................................................................LOL 
all work and no play.....
-
redriderno22 - Regular Poster
- Posts: 168
- Joined: Tue Jul 10, 2007 10:59 pm
Chemicals
by SeaMonkey » Tue Mar 10, 2009 10:16 pm
The various chemicals listed in the patent are the same ones that are used in electroplating as 'brighteners.' They enhance the 'solubility' of the plating metal in the electrolyte solution and also produce a smooth and shiny coating on the object being plated.
Since 'plating' also occurs in the lead-acid battery, and is partially responsible for the appearance of 'dendrites' on the plates which then become points of low resistance to current flow and will continue to grow unless treated.
Some of the additives made for lead-acid batteries to prevent or minimize sulfation are the oganic sulfonic acids which enhance the solubility of lead sulfate into the electrolyte.
The lead ions which are dissolved in the electrolyte make the plating of lead onto the plates possible during charge, in one direction, and during discharge in the other direction. The plating action is very slow and in very small quantities and does contribute to the reclamation of lead sulfate that might otherwise be lost as debris that settles to the bottoms of the cells.
To prevent the growth of dendrites it is necessary to 'burp' the battery cyclically at the rate of once each 30 seconds or so during charging. This is accomplished by momentarily removing the charging current and 'short circuiting' the battery terminals electronically by circuitry built into the charger. These 'burping' chargers may be home-made.
Best possible treatment regimen: Desulfator connected to the battery while trickle charging with a 'burping' circuit. While trickle charging the 'burp' rate may be slowed to once each several minutes.
For a very good 'primer' on lead-acid batteries and their rejuvenation go
Since 'plating' also occurs in the lead-acid battery, and is partially responsible for the appearance of 'dendrites' on the plates which then become points of low resistance to current flow and will continue to grow unless treated.
Some of the additives made for lead-acid batteries to prevent or minimize sulfation are the oganic sulfonic acids which enhance the solubility of lead sulfate into the electrolyte.
The lead ions which are dissolved in the electrolyte make the plating of lead onto the plates possible during charge, in one direction, and during discharge in the other direction. The plating action is very slow and in very small quantities and does contribute to the reclamation of lead sulfate that might otherwise be lost as debris that settles to the bottoms of the cells.
To prevent the growth of dendrites it is necessary to 'burp' the battery cyclically at the rate of once each 30 seconds or so during charging. This is accomplished by momentarily removing the charging current and 'short circuiting' the battery terminals electronically by circuitry built into the charger. These 'burping' chargers may be home-made.
Best possible treatment regimen: Desulfator connected to the battery while trickle charging with a 'burping' circuit. While trickle charging the 'burp' rate may be slowed to once each several minutes.
For a very good 'primer' on lead-acid batteries and their rejuvenation go
-
SeaMonkey - Regular Poster
- Posts: 396
- Joined: Thu Aug 09, 2007 4:00 pm
- Location: Dystopia, USSA
25 posts
• Page 2 of 2 • 1, 2
Return to General Conventional Project Discussions
Who is online
Users browsing this forum: No registered users and 0 guests