Ravi's Meyer Replication- Tap Water to H2
Re: Source request
by Looking In » Tue Sep 18, 2007 7:57 pm
Rich (Looking In)
((((Is it really so difficult to tell a good action from a bad one? I think one usually knows right away or a moment afterward, in a flash of regret.)))) BOOM
((((Is it really so difficult to tell a good action from a bad one? I think one usually knows right away or a moment afterward, in a flash of regret.)))) BOOM
- Looking In
- Regular Poster
- Posts: 367
- Joined: Thu Dec 22, 2005 11:06 am
by kevinsatterfield » Tue Sep 18, 2007 8:47 pm
where'd ya see that one updated on the 4th? I cant find it....
-
kevinsatterfield - Regular Poster
- Posts: 1874
- Joined: Fri Mar 25, 2005 6:19 pm
- Location: Dark side of the Moon
Source request for updated D14.pdf
by Inkpen » Tue Sep 18, 2007 9:48 pm
Here it is.
http://www.hotlinkfiles.com/browse/waterfuel/42765
By the way. I am hoping someone will know the range and type of meter I need to cover the full volume of gas to be expected from 100% success. Also, is there a meter for hydroxy? If so where is it? If not then perhaps there is a correction table for oxygen meters. If there is please direct me to the right place. I refuse to believe that no one has yet actually measured their liters per second.
http://www.hotlinkfiles.com/browse/waterfuel/42765
By the way. I am hoping someone will know the range and type of meter I need to cover the full volume of gas to be expected from 100% success. Also, is there a meter for hydroxy? If so where is it? If not then perhaps there is a correction table for oxygen meters. If there is please direct me to the right place. I refuse to believe that no one has yet actually measured their liters per second.
Share free energy tech and all good things will follow.
- Inkpen
- Regular Poster
- Posts: 25
- Joined: Sun Sep 16, 2007 12:26 pm
- Location: South Western Oregon, USA
by glenn_aircooled » Tue Sep 18, 2007 9:59 pm
I was hoping to get a gas flow meter for 15 L per min.
Dont really know how much S. Meyer made.
Glenn.
Dont really know how much S. Meyer made.
Glenn.
-
glenn_aircooled - Regular Poster
- Posts: 572
- Joined: Sun May 21, 2006 12:21 am
- Location: Australia
Meter type
by Inkpen » Tue Sep 18, 2007 10:09 pm
Since gases have different densities they must have different meters. What type of meter are you hoping to get and does it have a correction table for hydroxy.
Share free energy tech and all good things will follow.
- Inkpen
- Regular Poster
- Posts: 25
- Joined: Sun Sep 16, 2007 12:26 pm
- Location: South Western Oregon, USA
It's baaaack!
by RunningBare » Tue Sep 18, 2007 10:38 pm
Overunity.com appears to have returned, looks like the spooks did not get it 
When we give up, we give in, don't do it!
-
RunningBare - Regular Poster
- Posts: 56
- Joined: Tue Aug 28, 2007 7:55 am
Re: Meter type
by kumaran » Wed Sep 19, 2007 12:46 am
Regards,
Kumaran
(Knowledge without action is useless, action without knowledge is foolish)
Kumaran
(Knowledge without action is useless, action without knowledge is foolish)
-
kumaran - Regular Poster
- Posts: 525
- Joined: Tue Oct 03, 2006 9:06 pm
- Location: Kuala Lumpur, Malaysia
higher amps??????
by stevie1001 » Wed Sep 19, 2007 9:10 am
- stevie1001
- Regular Poster
- Posts: 15
- Joined: Tue Sep 18, 2007 8:41 am
Questioning the master
by Inkpen » Wed Sep 19, 2007 3:03 pm
Share free energy tech and all good things will follow.
- Inkpen
- Regular Poster
- Posts: 25
- Joined: Sun Sep 16, 2007 12:26 pm
- Location: South Western Oregon, USA
by stevie1001 » Wed Sep 19, 2007 3:38 pm
- stevie1001
- Regular Poster
- Posts: 15
- Joined: Tue Sep 18, 2007 8:41 am
parallel circuit
by Inkpen » Thu Sep 20, 2007 12:04 am
stevie1001, this site helped me concerning series versis parallel. Please redesign the circuit to show parallel resonence and in clude the calcs for determining the capasitence of your cell.
Share free energy tech and all good things will follow.
- Inkpen
- Regular Poster
- Posts: 25
- Joined: Sun Sep 16, 2007 12:26 pm
- Location: South Western Oregon, USA
Re coils
by RunningBare » Thu Sep 20, 2007 1:48 am
The inductor I am using can be found in the Stan_Meyer_Full_data.pdf page 10-11 the bottom configuration.
I find this inductor works fine and because of the way it is wound it has built in parallel resonance due to the capacitance between the two windings.
The full documentation can be found here, it's a 2.8 meg html page, so expect a slow download from me!
I find this inductor works fine and because of the way it is wound it has built in parallel resonance due to the capacitance between the two windings.
The full documentation can be found here, it's a 2.8 meg html page, so expect a slow download from me!
When we give up, we give in, don't do it!
-
RunningBare - Regular Poster
- Posts: 56
- Joined: Tue Aug 28, 2007 7:55 am
Return to Hydrogen Production via Electrolysis
Who is online
Users browsing this forum: No registered users and 22 guests