Secret to Herman Anderson's water fuel system...

[Seth]

Thanks to all involved.. WB I knew if you were patient the true experimenters and truth seekers would speak up.

I would throw in my email and ect in.. but I dont want to waste yall's effort as I just do not have the capital to do extensive testing right now.. I have been "studying" for quite some time and will continue to do so. The information in this thread has been burned into my memory. Thanks for all your efforts and capital respectively.

pEace

[Ba2ho]

[waterboy]

mkc1962

I will try one last time to explain the simple safe vacuum technique. I must really suck at explaining things.

O.K., here we go. You have an aspirator pump attached to a water pump. The water pump pulls water from an air tight tank and then puts it right back into that same tank. The aspirator that is connected to that pump pulls a vacuum on the cell and deposits the gas in that tank

You engine pulls a vacuum on that same circulation tank and pulls the hydroxy out. So we call the tank the circulation tank. It has 13" of vacuum on it from the engine. The perfect aspirator will create a vacuum equal to the water pressure. So you ADD the circulation tank 13" from the engine AND the vacuum from the aspirator and you get 30" of vacuum on the cell total.

At 30" the water falls apart without electrolysis but that is just water vapor, so we want slightly below that, use some electrolysis and then between the cell and circulation tank we put a plasma tube and that plasma tube should split anything that goes through it.

One other thing - If you are alive on this Earth, you always have a dog in the fight. All that evil needs to prevail is for good men to do nothing.

[waterboy]

One other thing I might state AGAIN - It is my intent to place this process in the public domain and make it the common property of anyone that chooses to use it.

Anyone that files a patent on the method or apparatus will be met with a patent nullification process.

If you haven't figured it out by now, my word is good. Don't waste your money, this process is prior art.

[waterboy]

WTF - Here is one for more before I call it a day.

Now that your cell and circulation tank are under a vacuum, adding water to the tanks is simple since no pump is needed. Do what I do:

Get a fuel injector from a junkyard for 5 bucks. It is nothing more than a little valve. Use a 555 to drive a 2N3055 to pulse it on and off every second so you don't destroy the vacuum. It only lets a small amount of water in at a time.

The circulation tank should be slightly above your cell so water drains down into the cell and the gas bubbles up into the upper section of the circulation tank. The circulation tank is the place you add water. A float sensor to enable the 555 or a mechanical float valve from a toilet may also work just fine.

Place a splash barrier between the pump inlet on the bottom of the circulation tank and the pump outlet above the barrier. It could be low density foam or SS mesh.

I drew a diagram a while back and I will post pictures in a few days once my domain name is hidden behind a proxy register. Keeps the crazies out of my yard.

[williamssteve]

[luka]

[waterboy]

[waterboy]

[mkc1962]

Waterboy,

I think you did a darn good job of explaining things. My simple box diagram was just to see if I was grasping the bulk of it, and to get your opinion, or that of others that DID seem to entirely grasp it. I was hoping you or someone else might have done similar by now (drawing or sketch), so just decided to post what I had and ask for opinions.

As for being alive, I'm alive and well and plan to fight to the end for what I believe in. I wish I had more time than I do to actually practice lab experimentation time, and post my actual results here as you do. But unfortunately I am not retired yet and am forced to work more than I care to. So I do my best to keep up with the technology and information and what time I do have try my best to make it count. As for dog/cat fights, between two that have their teeth bared at one another, that one I'll wait till the fur quits flying. No need getting into it when I dont even know what its about. Personally I'm glad you chose to continue to post.

As for public domain, that too is my full intent should I be so lucky as to stumble on the final result. I have no intent of ever patenting anything, nor would I ever steal anything. If that is the way you took my post/drawing, I am sorry that you feel that way and are quite mistaken by my intent. I do think my opening line of my post was to explain that my drawing was merely MY PERCEPTION of posts that had been placed here by you. Never once was it to claim it as my own.

I thank you for your reply, and wish you all the best, as well as safe and positive results in your continued efforts. I do hope you continue to share your efforts with those that find it of value.

[waterboy]

[waterboy]

[Hybrid]