Who here is running a daily driver with hydroxy boost?

[weggl]

Fixase, I used a uncoated board an wired it up with hook-up wire.
A bit slow but thats the way i use to do it when i was a kid. no fancy boards in those days just steel chassis, even before transistors.

WEGGL

[glenn_aircooled]

I also put together an O2 offset device using a Simple board with lots
of holes in it.
It is made of same material as PCB's - but doesnt have copper on it.
you draw the schematic onto Graph paper then using texta -
mark out the parts on the " proto board ".
It takes a few hours - but is fun
of course you need solder iron & hook up wire. Trim all the excess
away so no shorts and mount in a box to keep water out.
-
This type of construction is not uncommon, for small Prototypes
of electronic boards [ I know there are Comp programs now ]
this used to be used all the time. Prototype Board.!
Glenn.

[nellekwt]

Any chance of getting some pictures of your setup HugeDuallie? I am a little confused as to your setup, but it sounds like you have exactly what I need to build.

[mrgalleria]

Aloha,

We have now done over one dozen conversions. Latest include two Toyota pickups, and a Toyota Matrix. Currently building units for an Echo, vortex V6 powered Chevy van, Mercedes turbo diesel, and 351 ford pick-up.
Two things people notice right away. Smoother idle, more power. The Matrix went from idling at close to 1100 RPM to 900 RPM.
We had a hydrogen workshop. A certified mechanic was there who is testing and using many different designs. Everyone whom had a booster installed by me in the area was present. All had big smiles on their faces. Many people are calling me daily, purely on word of mouth recommendations from previous installs.
You may want to try the same things. There must be a couple people in your area working on this. These workshops are fun and informative. This is a revolution in networking hydrogen technology. Even a local TV station announced the workshop which included a brief interview by myself, even though it was a spur of the moment, low profile event. It was even raining and at night, so we could not demonstrate installations. But the excitement and belief level were unanimous. No dissenters were present.
If you plan to help family and friends install boosters (as well as yourself), please make a durable unit, limit amps to keep temps down. Don't worry about producing huge amounts of hydroxy. I will keep my project folder updated with installations and design updates.
Bill

[williamssteve]

[huck]

[rampage263]

hey dullie got any pics of that thats a long tube pvc tube for having plates that size and 1-4 thick does it heat up much [/b]

[glenn_aircooled]