these are the cups I am using I got 4 sets of 2
this is the PVC cells I made to house them, I still need to find some thick plexiglass to make the base and top for it, You have any recommendations, I tryed Lowes and Home Depot but they only have thin stuff.
close up of the cups
Cups in the cells
And this is sort of my take on a smacks booster type of cell I used 7 cups and wired them + n n - n n + it will go in a 1 foot high by 3 diameter PVC container.
To get the spacing on the cups I cut out 1 centimeter high rings from 1 1/4 in diameter pvc pipe they fit perfectly in the bottoms of the cups then I glued it altogether. The spacing between the cup walls ends up at about 2 millimeters. I also drilled holes in the bottoms of the cups to let water move though.
And you can these cups at walmart in the cooking wears section its only $1 for 4 of them and they seem to work well.Statistics: Posted by Ioku — Sat May 31, 2008 1:51 am
]]>