New Hydrogen Fuel project online

[eco]

OK BOB,I UNDERSTAND
THANKS

[Chris]

Hi guys I have posted a few more pics of my Electrolyzer v5 design. I am sorry I have not had time to work on it further but felt you should at least have these pics to see where I was going with this.

This is my No-Weld design as you may recall so anyone with access to a hardware store and a drill press can build this model.

I'll post more pics as soon as I get them

[kevinsatterfield]

Chris,
Have you been able to do any welding of plastic or of any kind with V5 yet?

[JF]

Hi, i am reading this whole conversion. It's ok for amp/sq inch, but i want to know what is the space between each plates.

JF

[brian]

most are spaced 1 to 5 mm.

[JF]

How to know which is better

[Chris]

[Looking In]

[Chris]

[BEMET]

[Looking In]

[bigj8550]

Chris I am new to the sight but I have been looking through alterntive fuels for over a year now. Let me see if I can give you some help with your sales. First of all let me give you some back ground of myself. I have worked in the Automotive industry for 11 years now before that I was in the electronoics field. I was a service technition at a Local Best Buy store for Two years before they started sending all repairs to a central repair center out of town. In the automotive industry I have repaired all types of vehicles (but mainly chevrolet), I have sold vehicles (new and used) worked as a service writer, and have found my nich in the parts dept. of a chevrolet dealer. (lot less stress and I get the best of all the automotive world). When it comes to sales your target customer is a person that has some automotive knowlegde but is not a tech and has very little electrical knowledge. Your basic DIY cust. You are looking for people that have the capablity to install the system but don't know how it works. You will get the most sales and the easist sales from these type of people. So your best bet is if you have a mom and pops hardware store or napa carquest something like that see if you can cosign sell your product with them. Stay away from autozone. wrong kind of clinetel. Also go to car shows try there. Second produce your self a brochure and hand it out. Be sure to be conservitive in your brochue also add lines like no warranty expressed or implied, as is, you also might want to think about offering a money back guarrenty if the can prove They got no improvement. (most people cannot provide documentation on fuel recipts and mileage)... Hope this helps email me if i can be of more help
Jeremy
bigj8550

[bigj8550]

CHIRS
yahoo Im me or e-mail me I have a better idea on how to sell your system.
Jeremy
bigj8550

[Chris]

If possible I would prefer to just chat about it here on the forum since I don't have access to my home e-mail when I'm at work.

Is your idea something you don't want to share here online?

[Chris]

How's $900 per unit sound guys? I have been crunching numbers for 3 weeks on this now and am very close. I started production on my first prototype last night.

You're going to love the pictures of this thing when I post them. Hell I'm going to love just looking at it. It will look like something out of Star Trek -And I'm not kidding.

The efficiency should be through the roof and it will run directly off of the DC from your car (alternator). The unit is designed for 30 amps draw but until it's built I won't know what the realistic numbers are.

I'm very excited about this. More excited then I have been about an electrolysis project in well over a year. I mean it when I say you guys are going to love this.

I will probably sell the units or at least parts to you guys cheaper but I'd like some opinions on whether or not $900 seems like a reasonable for a FULL and complete unit (bubbler and all)?