AlaskaStar

[kevinsatterfield]

Hi, after just looking over this picture http://oupower.com/index.php?dir=_Other ... &PageNum=3

Your theory of that waveform is exactly wat Steve Meyers looks like ....

It wuld do us ALL a great deal if you culd help us understand how to create that waveform and even answer a question I cant seem to get answered...that is how wuld you go about make'n the top half of that waveforms' amplitude higher than the lower half? If that is possible and it must be.....how can we do just the opposite and have the lower half of that waveform higher and oscillate in that manner where as you wuld have a higher possitive potential at one turn and then have it switch to a lower possitive potential......Your oppinion on that wuld be greatly appreciated.....

[AlaskaStar]

Oh! That's an EASY one!!!

Use at LEAST TWO "SLIDING" type Potentiometers, similar to what is used in say an EQUALIZER for a radio setup. then using a small motor, and a "Crank" type throw, this allows the speed of the motor to slide the potentiometers or variable resistors up and down to the required frequency. one is for the positive side and one is for the negative side.

try to overlay these, kinda like three-phase power, and see what kind of results you get.

I haven't tried it, but I think it would be REALLY Interesting to do. the waves have a striking similarity to RESONATING SOUND WAVES like those inside a tube.

AlaskaStar

[patriot 63]

[AlaskaStar]

I am glad to see/hear or rather read that someone is actually building something, so GOOD JOB.

This thread or series of thread are not about me. They are about technology. I have my own opinions, as does everyone else. I really do not want to be put up on a pedestal, or something to that effect. I see a need for improvement in this world and I try to make things go from thought to reality. But Thanks anyway, it is nice to know that the "norm" of being slammed is appreciated by a few.

I completed a demonstration of firing off a car on hydrogen (2 burns on film, 1 burn OFF film) and just received my DVD's from the Video/Photo Tech 1 hour ago.

So I am typing this while watching these DVD's. I know people are going to ask for copies. I don't have many funds left over from this demo, as I had consumed it all to set up a proper display (over $600) and only funds remain are for the "NEEDS" list of regular stuff, bills etc...

So the answer is NO, no copies at this point, as my DVD WRITER is also out of commission, and needs replaced. they don't make them like they should.

The demonstration went well. had only one nut bag in the crowd, and everyone wanted to run this guy over with a truck and FAST.

Tomorrow, going to various power plants and they are going to spool up a TURBINE Plant to over 110% Capacity (generator head) and LOAD IT UP, as well as a Diesel Genset with Hydroxy Booster at over 110% at the Generator Head.

then I have a 6 cylinder to install into a 1974 Chevy 1 Ton, and Install a Slid-In camper on the back, return a Ford truck that was borrowed, and put the Chevy up for sale.

Also have other things lined up for work like a 2004 Ford V-10 Triton needs converted to run on only 5 cylinders at highway speeds, and the triton can do it, for fuel economy.

so Very busy, I probably will NOT be posting, more likely only READING, so I will read responses, but not be posting.

OH! and you Solar tech's....we now have 24 HOURS of LIGHT! How about that!?

But in the winter we get 3-4 Hours of TWILIGHT and it's called "Daylight" even though the sun never even pokes over the horizon.


AlaskaStar

[kevinsatterfield]

[passion1]

[AlaskaStar]