Low energy Input, mass hydrogen output methods in use.

[resident_genius]

[AlaskaStar]

Yes I have viewed this site, and have been out of town (state included) for a while, and these can easily be reproduced at home in the garage. They are of magnetic waveform dissolution patterns. The “Ancients” knew about this, and likewise I can show you how to re-create resonance of this type. There are a few materials needed.

1 Cookie Sheet, Flat with ¾” Edges all the way around, and square.

1 LARGE SUBWOOFER preferably over 100 watts.

Glue

Container of Salt

Amplifier to match Subwoofer

Electronic Sound Synthesizer that can produce constant sound when keys are held down.

Glue subwoofer outer metal frame directly to the center of the bottom of the cookie sheet.

Connect subwoofer to Amplifier, follow manufacturer instructions if necessary.

Connect Amplifier to output port of digital synthesizer.

Pour a “thin” layer of salt onto the top of the cookie sheet.

Set woofer/cookie sheet on hard floor.

Turn amplifier and synthesizer on.

Hold down one of the keys and watch what the salt does after 30 seconds.

Try another key…and another….and another….

Keep going. Now try 2 or 3 keys at once….

Notice any corresponding patterns?

Try a round pan….

Triangular?

What about a pentagon, or a hexagon? Does objects in the middle affect anything?

See resonant frequencies are easy, and the ancients knew that producing the “OHM” sound, would in fact produce the “OHM” sign (last letter of Greek alphabet) on a principle as this.

AlaskaStar

[importfanatik]

Hi guys, Ive been researching Over Unity Energy for the last 3 weeks and have been reading this thread for the last 2 days.

I still havent read all of it yet though so please excuse me if someone has already posted this:
Its a new bulletin for AirGen corporation regarding their hydrogen generator which has run continuously for 15 days creating hydrogen at ambient temperature.

"The development is one of many derivative technologies the company has discovered from novel chemistry involving colloidal metal catalysis reactions. "

"the process utilizes metals which are commercially available in large quantity at low cost, "


"The company has demonstrated cells producing hydrogen gas under numerous different selections of metals and colloidal metals."

[importfanatik]

oops, didnt realize that was Linnard Griffin's company.
..Old news..

[importfanatik]

here is the link anyway:

[delta-t]

[AlaskaStar]

[delta-t]

[importfanatik]

[olympios]

[MarkinAustralia]

I hope this helps,
one of the problems with hydrogen storage is in gas form it takes up a lot of room, or is rather complicated in liquid form (Have a look at new bmw design) Using ammonia and converting it back to Hydrogen on demand might be a way of easily storing and distributing hydrogen.
Have a look at this link
http://www.greencarcongress.com/2005/03 ... st_pr.html
Kind regards
mark

[MarkinAustralia]

This is a perhaps better site to read up on it
http://www.electricauto.com/_pdfs/Portl ... er%20B.pdf

I always could be way of beam..and as always welcome to be corrected

[stanlives]

very good stuff...

http://www.madsci.org/posts/archives/Ma ... .Ph.r.html

[stanlives]

[stanlives]