Guidlines for good production rates?

[jimmy]

Can somebody point me in the right direction to a table or list or paste info here on what would constitute good gas production. I know the info is here but there are so many factors etc to take into account.

Experimented today with a pair of tiny electrolysers running in series at 6v 6a, only tested the gas output from one unit and in rough terms it was 43 bubbles per minute or 86 from both units. 1 teaspoon of NaOH in each 250ml unit.

The following 20 second video is of us igniting the froth from a tiny bit of dishwash in the electrolyte. WARNING does contain a 4 letter word.

[MarkinAustralia]

Hi
After watching the visdeo i siggest you look at your saftey procedures and have at least one, if not two bubbles in place before igniting anything.
You need to measure the gas with either a flow meter or displacement. Read through the projects on this site and you will gain some insights.
best of luck
Mark