I am intended to do my cell as better as possible, so I ran my first test on a 3" pvc tube, and I thought the cap blew because of preassure, but BIG MISTAKE, I ran the flame test, WITHOUT THE BUBBLER and trying to remember the flat sound of explossion, it was exploding (I ran the preassure test with 14psi and the sound was low and not hard.)
Well I have my bubbler and obtain my Orange flame.
Now , I want to ask if the next Ideas are on the right track or have to go back and think twice, for safety purposes.
I am intended to add something to the water after is mixed with electrolyser (I have 1 lb of KOH pellets) to make it "GEL", so in case of leak, will not drainall teh tube.
I am thinking to use thicker plates (I am using 22 gauge ones) because some one writted Thinner the better.
Also, I read in another forum to use PErforated plates.
I ran test with the stanley meyer device for frequency signal and I obtain better results connecting the device (array of 14 plates 1.5in x 11 in) directly to my truck battery.
Now I am in my way to built a larger unit, the small one only scares me the hell out, for the small preasure and the poor quantity of gas, I WANT MORE!!!!
I wnat to know if anyone wants to share any ideas on how to use this ennergy power, besides cars, Using it to heat a house, an oven, to give Oxigen to poeple who needs O2Tanks, Melts toxic waste becaise the high temeperature it can reach, etc, etc, I wil really apreciate that.
I am intending to do a podcast on theese situations, How to build a device, How to apply the device, etc, and I encourage you all to share your best smile and talk to the camera (not the candid one
) Share with the world.
If you have any comments beside my poor english redaction, please fell free to suggest anything, It?s for the best intrest of developping.
B. Regards
Juanito
