test electrodes Project Page 1

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: December 22, 2008 10:33am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from saisunee

Click Here to Re-Display the Main Project Page

Project Description:
to maintain a close electrode space / gap and not get clogged by gas i developed the following:
knurled finish on surface to give ejection points for electrons, spiral grooves to draw and chimney the gas up and away from contact face area. with the base of the cell restricting free electrolyte flow the rise from the gas produces 2" of vacuum within the cell. In reality the major concentration of electrical charge is on the edge of the grooves, this being a larger edge than the points on the knurles. the top of the cell is a cone that forces the gas to combine into large bubbles and not fog the cell. when the H2 was tested the resultant noise from the combustion appeared to be louder than normal. this not being actualy proven, but i would guess that the H2 gas being held within a voltage zone may be making it H1 and not H2.

Sorry... No description for this picture at this time.
The picture name is: cell.JPG
Sorry... No description for this picture at this time.
The picture name is: cellx.JPG

Click here to continue Drilling into Projects from saisunee
Click Here to Re-Display the Main Project Page
This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: December 22, 2008 10:33am v7.01
WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!
Click Here to go to my YouTube Channel!!
Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!
Click Here to go to our ARCHIVED Discussion Boards.
Please consider donating to help support this website!