Welcome to OUPower.com
"Over Unity Power" Research

I used standard compressor fittings and only afterwards found out that the irrigation chaps have lower pressure valves fittings and gauges at a third of the price...bahhh humbug (my version wasnt so polite )

This is the 4 way regulator Im using, mounted remotely from the case. Thats the adjustable safety valve on the right, left is the gauge of course and in the middle coming out towards you is the red reinforced fuel tubing which goes to the bubbler. On the bottom (not visible here) is the feed line from the case Nice closeup showing how I had to mod the spring to get a lower pressure "switch off", the old one is on the left, I also had to build up the diaphram a little higher to suit my needs.

Click here to continue Drilling into Projects from peterZA Click Here to Re-Display the Main Project Page This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!) This Project was last updated on: October 31, 2007 03:17pm v7.01 WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK! Click Here to go to my YouTube Channel!! Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board! Click Here to go to our ARCHIVED Discussion Boards. Please consider donating to help support this website!