some experiments Project Page 1

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: August 18, 2009 10:45am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mzk

Click Here to Re-Display the Main Project Page

Project Description:
These are the experiments I made few minutes ago.

This is little pvc pipe. I wound first several windings (one coil). Maybe 40-50 turns.
No effect.

Second I wound another 2 layers (3 coils connected in parallel). The last two windings (as you may saw) are fast wound and not so accurate as the first one.

No effect. No bubbles.

I have tested and Tesla's pancake coil, thicker cable, but no success...

I have made these experiments with the hope I'll see at least several little bubbles going out of the pipe, but I was not able to see such bubbles.

I have burned this mosfet (irf540).

My signal generator can boost up to 400 kHz, and I think the frequency was not less than 200 kHz.
I have no measures.

I have played little with the frequency.

I think I could have made a mistake, I have put KOH in distilled water, but I don't know how strong is the solution.

I think there shoud be used higher frequencies.

Sorry... No description for this picture at this time.
The picture name is: Snimka000.jpg
Pancake coil.
Sorry... No description for this picture at this time.
The picture name is: Snimka002.jpg
My signal generator. I fryed the mosfet...

Click here to continue Drilling into Projects from mzk
Click Here to Re-Display the Main Project Page
This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: August 18, 2009 10:45am v7.01
WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!
Click Here to go to my YouTube Channel!!
Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!
Click Here to go to our ARCHIVED Discussion Boards.
Please consider donating to help support this website!