Welcome to OUPower.com
"Over Unity Power" Research

Thyristor Charger Project Page 1

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: February 14, 2007 01:19pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from Palic

Click Here to Re-Display the Main Project Page

Proceed to another page of the Thyristor Charger Project: [<<<   <      >   >>>]

Front view of the thyristor charger, It's ugly I know.
The white pot is the one I use for setting the charging current.
It's the pot RV2 on schematics.

The hole for carying the charger and forced air exit

Sorry... No description for this picture at this time.

The picture name is: IMG_0959.JPG

It'open
Left instrument is for voltage, and right one for current

I mesured the secondary transformer voltage, it's 18V
On 14 volt's the charging is to slow
I use series resistor, will take a picture for current limiting.
The transformer is 100W

Proceed to another page of the Thyristor Charger Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from Palic

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: February 14, 2007 01:19pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!