Foundry Project Page 29

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Going up!

I hope this works!

Holy Crap! No one mentioned anything about fire! -This foam stuff was supposed to be "The Best!" -Well either I did something very wrong, or I didn't have enough information. Fire was definitely a result of the pour into the foam. I stopped because I was worried.

-------------------

Now that I have had a lot more discussions with people doing this Lost Foam method, I have learned that there is usually always a fire, resulting from the foam being consumed. This is to be expected so be ready for it if you do Lost Foam castings. The real trick is to have a very large sprue so that you can continue pouring right through the fire. If you stop or hesitate you will ruin your casting, as I did.

I poured off the rest as ingots because I had no other items to cast :(