Welcome to OUPower.com
"Over Unity Power" Research

Mr. G cell Project Page 7

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: August 8, 2008 06:12pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mrgalleria

Click Here to Re-Display the Main Project Page

Proceed to another page of the Mr. G cell Project: [<<<   <      >   >>>]

This is the Mr. G cell with Goop on surfaces not
exposed to electrolysis. Before and after testing
seemed to demonstrate that the coating increased
production about 15%. I coat all stainless now.
7/14/08. Now cover coil with the Lowes economy hose- 2".

7/14/08. Building the G cells is time consuming. Here, a lot of metal was cut by my daughter. Many thanks to her! You can see we are keeping busy. In no time I was ready for more.

Proceed to another page of the Mr. G cell Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from mrgalleria

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: August 8, 2008 06:12pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!