Welcome to OUPower.com
"Over Unity Power" Research

Electrolysis Project Page 58

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Proceed to another page of the Electrolysis Project: [<<<   <      >   >>>]

Another angle for those interested in the setup.

Another setup shot.

Here I stuck 4 plates into the one spacer plate just to illustrate how it will hold the plates from within the box. There will be 2 spacer plates in each box of course and they fit just perfectly in here.

You couldn't ask for more perfect spacing guys. Man I'm excited to try these.

Bill, these are your 2 spacer plates. I didn't have time to do mine tonight since it took us 3 hours (with setup and clean-up) to just do these 2 plates. I'll do mine next week when my assistant has time to go back to the shop with me. -I can't be around this dangerous stuff all alone you know :) -Even I wouldn't be comfortable with that. Now if it were my own shop, that would be different! --Unfortunately, that could be years away unless some of you are in the giving mood! lol

Um yes... for those of you who will dare ask, the protective film covering will be stripped off so that you can clearly see through the spacer plates into the electrolyzer.

Proceed to another page of the Electrolysis Project: [<<<   <      >   >>>]

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!