Welcome to OUPower.com
"Over Unity Power" Research

19 Cell Series-small Project Page 5

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: October 17, 2006 02:27am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from glenn_aircooled

Click Here to Re-Display the Main Project Page
Project Description:
History: My first HydroBooster was a 15 inch x 4 inch Pipe with 7 cell series Electrolyser inside it. It ran Ok but the main problem was it was Too Tall (& narrow). So Bubbles congested at top when rising. I found out on Dismantling that it was constructed wrongly Too.
-
Well I wanted to try something better so with a few more plates and Cutting the 15 inch ones in half, I created the new 19 Cell series-small.
-

Proceed to another page of the 19 Cell Series-small Project: [<<<   <      >   >>>]

This very early view showing frothing over the plates. { this is VERy UN-Productive, as froth spills over plates - Current goes up and Gas production Goes DOWN. )
I wanted to get conditioning right up to the top of the plates , so I was running the electrolyte a little too high.
-
Hey but it looks impressive to the Uninitiated.!
-
Now for TEST results....see Forum...glenn_aircooled...

Proceed to another page of the 19 Cell Series-small Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from glenn_aircooled

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: October 17, 2006 02:27am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!