Electrolyzer v6 Project Page 4

Welcome to OUPower.com
"Over Unity Power" Research

Electrolyzer v6 Project Page 4

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: July 21, 2008 12:29am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Project Description:
Yes I'm on my 6th version now and extremely happy with this Brute Force Electrolyzer design! I believe I'm closer to my goals now then I have ever been before! Please let me know what you think of my new design! -Enjoy!!!

Please NOTE: Over the next few days I will be changing and updating much of this project. You will probably want to check it from the beginning for the next week as I may be re-working the format.

Another shot of the jig assembly. The hard drive magnets are holding the #316 plates down until the goop glue dries. Yes good ole' goop glue. I use it constantly. I swear by the stuff!

Still concerned about the quality? Try e-bay I'm sure you'll find something to your liking there.

I want people to know what they are buying when they purchase one of my units. There will be evasive double-talk and half answered questions.

6 units now in their tubes awaiting final assembly.

After final assembly these are ALL pressure tested up to 60 psi. -Show me where on e-bay you can find a unit that someone will do that for you?

It took me 2 years to develop a proper method for bringing a 3/8" stainless steel #316 bolt through schedule 40 PVC without having any leaking. Units are filled with water and pressurized to 60 psi overnight. Any leaking will show up the next morning.

Hell most of the ya-hoo's on e-bay develop their cell in 2 weeks and start selling it the very next week on e-bay. They don't have a clue what they are doing in most cases (yes there are some exceptions). Many of them have very dangerous designs that could absolutely cause explosions or damage to your vehicle.

I spent 6 years developing these cells. Am I done tweaking and improving ...hell no! -But you can be assured they are solid and very safe.

Gluing the unit together so that it can stand on its own. I like my hexagonal setup... it looks rather interesting when complete!

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: July 21, 2008 12:29am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!