Welcome to OUPower.com
"Over Unity Power" Research

Aluminium electrolysis using tap water Project Page 3

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:37am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from sebaw

Click Here to Re-Display the Main Project Page

Proceed to another page of the Aluminium electrolysis using tap water Project: [<<<   <      >   >>>]

Cell after 5 seconds.

Cell after 6 seconds.

This is cell design drawn for easier understanding.

During this experiment i have also noticed that the place of attachment of the electricity to electrodes is of great importance, i also did an experiment with only 2 electrodes, the rod and small barrel, i was suprised when i found out that if i connect my cathode to electric current at the bottom of the cell and my anode at the top the procces is a bit faster...

I don't know if this means anything, but there is no excesive heat during this experiment, only some white smudge forming, dunno what that is....

Proceed to another page of the Aluminium electrolysis using tap water Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from sebaw

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:37am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!