Welcome to OUPower.com
"Over Unity Power" Research

8 plate series cell Project Page 3

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: February 14, 2007 01:26am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from kumaran

Click Here to Re-Display the Main Project Page

Proceed to another page of the 8_plate_series_cell Project: [<<<   <      >   >>>]

Drilled 8 holes (5mm) into press acrylic and made thread for set screws (5mm). PVC gap closer goes here.

Side acrylic cover (20mm thick) pressed with PVC gap closer in between.

Drilling bottom acrylic cover (10mm thick).

Side view.

PVC gap closed cut into rectangular shape for top and bottom. I have replaced fiber tube with nylon tube. Fiber cannot withstand chemical.

Proceed to another page of the 8_plate_series_cell Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from kumaran

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: February 14, 2007 01:26am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!