Welcome to OUPower.com
"Over Unity Power" Research

01-Simple electrolyser - using coke bottles Project Page 3

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:37am
v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from Steve-tee

Click Here to Re-Display the Main Project Page

Proceed to another page of the 01-Simple electrolyser - using coke bottles Project: [<<<   <      >   >>>]


I built this machine late last year. It stands 30 feet tall and carries a 20 foot diameter rotor.
It's all home built, like most of the things around here   .

During times of low electrical demand, this machine produces compressed air at 120PSI.
When all the air tanks and electric batteries are full, the machine stops until demand returns.

The latter is a waste of good wind power, so I have been using the excess power to create Oxy-Hydro gas. This machine will make enough gas to blow my home valley all the way to arizona, so I better be careful with the matches   hehehe.

Proceed to another page of the 01-Simple electrolyser - using coke bottles Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from Steve-tee

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:37am
v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!