Foundry Project Page 24

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

My little makeshift skimmer needs to be improved. I have the spoon only "Duct Taped" to the metal rod here. I do NOT advise that for anyone, as it may come off. I will weld or bolt my spoon on in a few days, for now I will be quick with it.

The moment of truth. This is my very first pour ever! I hope I don't do something wrong. My anxiety level is rather high right this moment.

I decided to try a pour into some sand with foam under the surface. It was a very quick and dirty "Lost Foam" process test. I later learned that you want it buried with about 3 - 4 inches of sand around all of the sides of your object, but oh well. :)

Well I survived that without incident. Let's see how I do on the ingots. Hmmmm I missed a little bit. I need to work on my aim. I think I'm going to try my other hand to lift next time.