Welcome to OUPower.com
"Over Unity Power" Research

Foundry Project Page 20

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Proceed to another page of the Foundry Project: [<<<   <      >   >>>]

I hooked everything up and came upstairs to the garage. I have plenty of hose because I ordered an extra 10 feet from the normal 5 feet included in the package. I plan on putting the propane bottle outside when I fire this up.

In this picture I am preparing to light it, so that I can test my new regulator. I am not sure I like how I have the connections done. I may put my shut-off valves at the burner so that I can set the tank outside immediately? hmmm

I lit it several times and it kept blowing out as I turned up the PSI beyond 2 or 3psi. So I put my home-made flare on the end. This helps to keep things ignited. It performed very well, and I had zero blow outs.

I am trying to get a nice close pic of the flame, as I am adjusting it. I will play with it a bit more tomorrow to try to find the exact air/fuel mixture for the "Neutral" flame that is spoken of so often.

I decided to put it in the furnace to take a few pics.

Here is another angle for you to see the flame better inside there.

Stay tuned as tomorrow I will try to really smelt some metal. I think I finally have all of the pieces of this puzzle in place and I am expecting a nice result for my first pour. I will probably just pour some ingots first, nothing major... I simply want to get the hang of doing this before I try making some real casts. See you tomorrow!

Proceed to another page of the Foundry Project: [<<<   <      >   >>>]

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!