brute force neutral plate cell Project Page 2

Welcome to OUPower.com
"Over Unity Power" Research

brute force neutral plate cell Project Page 2

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: January 11, 2009 10:50pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from resident_genius

Click Here to Re-Display the Main Project Page

another shot before she got modified......

shot showing sealing mechanism on lid and means to attach wires.

the whole apparatus. i soon realized that that box sealed as well as tupperware with a hole in it, and brass fittings corrode very quickly and turn ugly black when exposed to electrolyte. my electrolyte of choice is KOH, potassium hydroxide, lye, caustic potash, etc. it has many names.

you can quite literally see the production being strongest (look at how far vertically the foam rises) at the negative and positive, and dips in the middle. decent production from the neutral plates for not being electrically connected! not good enough for me though.

well, i got ahole of some plexiglass and a jigsaw. in an attempt to boost neutral plate production, i covered three of the four outer sides. the top side was where the bubbles escaped, so i couldnt seal that off! i wanted to see how well it helped the plates produce. note the two extra holes, those were for the original two-bolt design. obviously there would be current leaks all over the top, and those two holes, but i figured, hey- if i can limit it, i can limit the wasted electricity!

Click here to continue Drilling into Projects from resident_genius

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: January 11, 2009 10:50pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!