Welcome to OUPower.com
"Over Unity Power" Research

Bubbler Project Page 2

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: October 31, 2007 09:16am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from peterZA

Click Here to Re-Display the Main Project Page

Proceed to another page of the Bubbler Project: [<<<   <      >   >>>]

a view of the business end. I tested it under water using a compressor.
at slow flow rates only the inner 2 or 3 holes release bubbles and at higher flow rates all the holes emit bubbles.

had to go in the top of the unit to get things right regarding water level and tubing, makes it a bit tricky putting things together but I'll probably only do it once...at least I hope so

for visual water level I used a bulkhead and elbow with rigid nylon tube from a hydraulics company

Using the original bracket( flattened and painted) it was mounted to a wooden trolly.

the big picture of the trolley, its on castor wheels for easy rolling around.
If the wood planks seem odd thats because they formed the center of a 7ft cable drum, which is why they have a slightly rounded side. I tried planing them flat but it was too much work and seemed unnecessary.

Proceed to another page of the Bubbler Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from peterZA

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: October 31, 2007 09:16am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!