Air Fuel Project Project Page 2

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: July 27, 2009 01:35am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mrgalleria

Click Here to Re-Display the Main Project Page

Kohler 6.3 kW gen, 950 c.c. 2 cylinder motor, was propane. 322 lbs.
Using 3/4" sprinkler valves until better brass valves can be gotten.
Electric starter. Holds 4 quarts of oil. This is well built.

Sorry... No description for this picture at this time.

The picture name is: kohler 2.JPG

The idea is to hang some compressors from this frame to be driven by the 12" flywheel. They should supply the air to run the motor. The air will go from the pumps, maybe two running in series, to one or more storage tanks. Then the air will be metered through a valve to the motor.

Motor has points, but also waste spark.
6/29. This coil has been removed. The points now operate the solenoids.