clovisc Project Page 2

Welcome to OUPower.com
"Over Unity Power" Research

clovisc Project Page 2

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from clovisc

Click Here to Re-Display the Main Project Page

Project Description:
This is my hydrogen generator.
I was snooping around on the net to find a way to get better MPG, I had been looking over everything regarding the GEET (Paul Pantone's PMC) for a few years, I'm from france and they are pretty active about that over there (over 100 "retro-fits" described on www.quanthomme.org -- check it out for more info (in french though).
Then I ended up on PESWiki. I found Andrew's page (http://waterpoweredcar.com/hydrobooster2.html) who helped me and sent me parts.
I built his prototype, and melted the lid (! - Cables were smoking :-O ), due to a short.
So I saw Chris's prototype made with walmart Cereal boxes, and decided to go take a look in their alleys.
I'm lucky, I have a big space next to my washer fluid tank, so I grabbed a big box for keeping bread.
Here it is ! I can put like a gallon and a half, in it, I won't be stopping too often to refill it !

Nota : at first I used KOH, I ran out during my experiments so I tried Baking soda. 1 tsp, and you go up to 50A ! Easy to find, and with one box, I'm off for at least a year !
I now use distilled water from walmart at 65c a Gal.

the back

You want to sand the plates to create tiny sharp edges (GreenEggs enlightened me about that in the forum). You know how the bubbles in champagne or other gaseous ( <-- is that word correct english ? not quite sure, let me know :-) beverages are created ? They appear only on tiny dust spots, or other "impurities" and asperities, like deffects on the glass. If you took a really, really clean crystal glass, there would be no or few bubbles.
There is something every one talks about on the net : http://eepybird.com/dcm1.html check out the explanation, you'll understand.
I think it's something important to think about to improve our hydrogen cells.

Sorry... No description for this picture at this time.

The picture name is: DSCF1374.JPG

You can find those at lowe's or home depot for about $1.30 ea.

Sorry... No description for this picture at this time.

The picture name is: DSCF1376.JPG

Another row of 21 plates, which makes a total of 33. In series, they draw about 8 V. The 12 first alone would draw 10-11 V.
You can notice I need to take care of my toenails too :-D (yuck ! Clovis, you're disgusting ! :-D )

Click here to continue Drilling into Projects from clovisc

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!