Welcome to OUPower.com
"Over Unity Power" Research

Foundry Project Page 18

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Proceed to another page of the Foundry Project: [<<<   <      >   >>>]

And here it is the finished product. Let's go test this baby out!

I am performing some minor repairs on the furnace since it was used as a charcoal furnace. I am re-aligning the tuyere and filling in the runoff trays, they are a pain.

Done ...now for the test run! This damn thing just won't burn right ...not at all. I have tried everything. After about 1 hour of messing with it and trying numerous things, I decided to make a flare and some vent covers.

There it is burning but it does not seem powerful enough to do much good?

See the tiny little flame in there. That's wide open. I should have realized the problem... but it's my first gas burner and no one really specifically said something that would have told me what was wrong here.

Proceed to another page of the Foundry Project: [<<<   <      >   >>>]

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!