Clausing 6913 Lathe Project Page 13

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: July 29, 2011 11:48am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Trying to get a good angle for you.

One more angle so you can see what I'm dealing with here.

I have flipped the outer hub over in this pic. Also please note the old collar and shaft assembly. It was terribly worn and uneaven. The roll pin which should be there to lock it in place with the inner hub's keyway ...yup that's missing as well which is why the thing is standing up straight.

Because of the way mine was configured for who knows how long... it was rubbing my housing very badly. I have inner and outer race grooves in my housing. Apparently this is NOT supposed to be the way this works. LOL