Welcome to OUPower.com
"Over Unity Power" Research

Clausing 6913 Lathe Project Page 12

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: July 29, 2011 11:48am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click Here to Re-Display the Main Project Page

Proceed to another page of the Clausing 6913 Lathe Project: [<<<   <      >   >>>]

This is a pic inside of the outer hub with the shaft and collar assembly in place as well as the snap ring and washer.

Here I have the outer hub removed for you to see. The shaft and collar (the new one I machined) are in place, the snap ring is in and the extra washer is in place. The way mine is set up right now this extra washer is doing absolutely nothing at all become nothing pushes on it from the left to keep it against the snap ring.

It also appears that my epoxy coating on the inner hub needs to be re-applied. Mine appears to be the older "black" color coating.

Here I've removed the extra washer since it's doing nothing. You also see more of the area my epoxy is missing.

This washer would just end up wearing on my shaft and rattling around inside the outer hub if I left it go. I'm sure I received my lathe with something mis-configured here which is why this is the way it is right now.

Pic inside the outer hub. This should be a 2605 bearing in there. But it's seated into the outer hub.

Proceed to another page of the Clausing 6913 Lathe Project: [<<<   <      >   >>>]

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: July 29, 2011 11:48am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!