Welcome to OUPower.com
"Over Unity Power" Research

GEET Project Page 1

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 21, 2009 11:20pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mrgalleria

Click Here to Re-Display the Main Project Page

Proceed to another page of the GEET Project: [<<<   <      >   >>>]

9/6/09. Two GEET's, to be used on the 2 cylinder generator.
General assembly, some welding and shaving done.
Top with longer rod is for heavy fuel like used motor oil,
bottom shorter rod is for gas, and lighter fuels.
Rods can be easily changed. Rods 1/4" diameter.

9/6/09.
GEET reactors all welded up. Arrows show flow direction of gases.
Bigger, outer tube is the exhaust.
The bolt on flanges bolt directly to the cylinder head.

9/6/09.
GEET setting on motor

9/6/09.
Another view.

9/21/09.
GEET manifold nearly complete.

Proceed to another page of the GEET Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from mrgalleria

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 21, 2009 11:20pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!