Why higher amps and more HHO aren't always the best move?

[fixaze]

[Hybrid]

[resident_genius]

[fixaze]

Ideally...a momentary ON type switch activated by a spring connected to the throttle would work best?

The length of the spring/wire part could be varied to adjust at what throttle position the generator would run. Wouldn't need perfect alignment...easy to tweak?

[Hybrid]

resident_genius you're more or less saying a cable operated valve after
a brake resevour storage tank. Could probably read the pressure inside
the resevour & kill the power supply when it gets to 16psi. But I don't
know when pressurized HHO will go Bang. Maybe someone from here has
blown up a cell & knows what pressure it reached ? I'm hoping I make
plenty of HHO so I can suck a vacume off the top of the 2nd bubbler with
a belt driven vac pump running at 1:1 ratio with the crank. This will feed
the motor HHO proportionaly by crank revs. This is more of an instant
gain of HHO feed (If enough HHO is made, like I said)
fixaze yes a triggered micro switch in the right accell possy would do it.
I'm hoping to do it like I typed above. But more work is involved my way.
Cheers !

[resident_genius]

[fixaze]

[mrgalleria]