by Beshires1 » Fri Jul 27, 2007 5:25 am
weggl , The Hybrid unit is a Series Cell. The bottom dish is Negative the top is positive, all others are neutral. I use Stainless Steel Pails because they give you much more side walls. this is where you set the spacing and is the active working area of these type cells. Look in my projects folder. You can get the pails in grades from 304 to 316. The Hybrid stack must be sealed using heat shrink wrap, nylon or some other compatible plastic material. tightly wrapped around the open ends of the stack. My cell is producing 2 ltrs. 12V at 13 to 18 amp.