Construction of Stan Meyers cells
7 posts
• Page 1 of 1
Construction of Stan Meyers cells
by drydenjw002 » Thu Mar 27, 2008 8:37 pm
If we knew what we were doing we would not call it research. AE
- drydenjw002
- Posts: 10
- Joined: Thu Mar 27, 2008 2:05 am
- Location: California
by Cap10 » Thu Mar 27, 2008 9:24 pm
Hi drydenjw002 I have been using http://www.mcmaster.com/ they are located in Santa Fe Springs So-cal and have a very good return policy fast shipping all that good stuff. When looking for your tubes on their site search for SS tubing and then select single line. Good luck on your cell! I’m attempting to build one also, despite all the discourage things I have been reading. I guess I’m hard headed. I noticed that once someone has one working they stop posting so it’s hard to get help on these things.
- Cap10
- Posts: 7
- Joined: Mon Mar 24, 2008 2:32 pm
- Location: CA. USA
by mrgalleria » Thu Mar 27, 2008 9:37 pm
Aloha,
I had mentioned this before but you can frequently get stainless free or for very little. Scrap yards, dumps, salvage, restaurant equipment, marine supplies and boatworks, auction yards, utility companies, etc.
Maybe those guys who quit posting after building a good cell because of criticism, apathy, inflexibility, and trying to work with people who are arm chair specialists. I post anyway because I know there are a lot of people here looking for info but not posting or commenting.
Bill
I had mentioned this before but you can frequently get stainless free or for very little. Scrap yards, dumps, salvage, restaurant equipment, marine supplies and boatworks, auction yards, utility companies, etc.
Maybe those guys who quit posting after building a good cell because of criticism, apathy, inflexibility, and trying to work with people who are arm chair specialists. I post anyway because I know there are a lot of people here looking for info but not posting or commenting.
Bill
-
mrgalleria - Regular Poster
- Posts: 358
- Joined: Sat Dec 03, 2005 4:52 am
- Location: Big Island, Hawaii
A SYSTEM
by drydenjw002 » Fri Mar 28, 2008 12:26 am
If we knew what we were doing we would not call it research. AE
- drydenjw002
- Posts: 10
- Joined: Thu Mar 27, 2008 2:05 am
- Location: California
by jackofalltrades » Fri Mar 28, 2008 1:24 am
- jackofalltrades
- Regular Poster
- Posts: 14
- Joined: Tue Mar 04, 2008 4:33 pm
- Location: Oakdale Ca
by kumaran » Fri Mar 28, 2008 2:46 am
Hi John/Jack,
Just browse through all the pages in project area at oupower.com. There are so many infos and photos which can guide you through. Look for series cell info. Chris (site moderator) project section has many pictures and you can compare which unit best suit for you.
Just browse through all the pages in project area at oupower.com. There are so many infos and photos which can guide you through. Look for series cell info. Chris (site moderator) project section has many pictures and you can compare which unit best suit for you.
Regards,
Kumaran
(Knowledge without action is useless, action without knowledge is foolish)
Kumaran
(Knowledge without action is useless, action without knowledge is foolish)
-
kumaran - Regular Poster
- Posts: 525
- Joined: Tue Oct 03, 2006 9:06 pm
- Location: Kuala Lumpur, Malaysia
by kevinsatterfield » Fri Mar 28, 2008 6:30 pm
-
kevinsatterfield - Regular Poster
- Posts: 1874
- Joined: Fri Mar 25, 2005 6:19 pm
- Location: Dark side of the Moon
7 posts
• Page 1 of 1
Return to Hydrogen Production via Electrolysis
Who is online
Users browsing this forum: No registered users and 59 guests