I dug up direct links to your items....
1. Digital fuel adjuster for the control of air/fuel ratio on EFI.
http://www.jaycar.com.au/productView.as ... BCATID=347
-
2. Hand held controller for digital fuel adjuster:
http://www.jaycar.com.au/productView.as ... BCATID=347
-
As I said on other thread, my friend is looking at using this system.
It looks to be very adjustable- but I am concerned that I would not have the
necessary skill / or understanding to adjust it correctly.
It would be very easy to run the engine Too lean and cause damage if I
adjust something wrong on this unit.
-
The PWM unit I dont see a real use for on Efficient series Cells.
If the unit was able to switch the input as a High freq say 19 Khz [ or whatever that freq was ? ]
Then I would see a great use.
I havent made a unit that produced Too Much Hydroxy at an efficient
level to need a PWM.
But I have found that Both Ignition timing and Fuel mixture could be
better off adjusted when on Hydroxy [ at larger volumes ].
-
Are you going to make one?
Glenn.