Help for our newbies
71 posts
• Page 4 of 5 • 1, 2, 3, 4, 5
by kevinsatterfield » Fri Jul 20, 2007 3:27 am
-
kevinsatterfield - Regular Poster
- Posts: 1874
- Joined: Fri Mar 25, 2005 6:19 pm
- Location: Dark side of the Moon
Re: help for newbees
by kumaran » Fri Jul 20, 2007 4:00 am
Regards,
Kumaran
(Knowledge without action is useless, action without knowledge is foolish)
Kumaran
(Knowledge without action is useless, action without knowledge is foolish)
-
kumaran - Regular Poster
- Posts: 525
- Joined: Tue Oct 03, 2006 9:06 pm
- Location: Kuala Lumpur, Malaysia
by kevinsatterfield » Fri Jul 20, 2007 4:17 am
-
kevinsatterfield - Regular Poster
- Posts: 1874
- Joined: Fri Mar 25, 2005 6:19 pm
- Location: Dark side of the Moon
by kevinsatterfield » Fri Jul 20, 2007 3:48 pm
-
kevinsatterfield - Regular Poster
- Posts: 1874
- Joined: Fri Mar 25, 2005 6:19 pm
- Location: Dark side of the Moon
by Beshires1 » Fri Jul 27, 2007 5:25 am
weggl , The Hybrid unit is a Series Cell. The bottom dish is Negative the top is positive, all others are neutral. I use Stainless Steel Pails because they give you much more side walls. this is where you set the spacing and is the active working area of these type cells. Look in my projects folder. You can get the pails in grades from 304 to 316. The Hybrid stack must be sealed using heat shrink wrap, nylon or some other compatible plastic material. tightly wrapped around the open ends of the stack. My cell is producing 2 ltrs. 12V at 13 to 18 amp.
"I've done so much, For so long, With so little, I'm now capable of doing practically anything with nothing."
http://sites.google.com/site/diydcmotors/
http://sites.google.com/site/diydcmotors/
-
Beshires1 - Regular Poster
- Posts: 244
- Joined: Tue Aug 22, 2006 10:57 pm
- Location: Water Valley, MS
by Beshires1 » Sun Jul 29, 2007 9:55 pm
"I've done so much, For so long, With so little, I'm now capable of doing practically anything with nothing."
http://sites.google.com/site/diydcmotors/
http://sites.google.com/site/diydcmotors/
-
Beshires1 - Regular Poster
- Posts: 244
- Joined: Tue Aug 22, 2006 10:57 pm
- Location: Water Valley, MS
71 posts
• Page 4 of 5 • 1, 2, 3, 4, 5
Return to Hydrogen Production via Electrolysis
Who is online
Users browsing this forum: No registered users and 15 guests