Please consider donating to help support this website! Donations Received (updated every few days): $933 |...................................| Shop Donations Goal: $35000
Welcome to OUPower.com
"Over Unity Power" Research
This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v5.41
WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!
Click Here to go to our Discussion Boards ...Discuss all sorts of cool stuff!
Please consider donating to help support this website!
Donations Received (updated every few days): $933 |...................................| Shop Donations Goal: $35000
Click Here to Re-Display the Main Project Page
It was a pain to make because it was hard to cut all of those angles and get it all together properly. I also had a hard
time glueing it all together but finally got it :)
Well tonight I started my Gingery Lathe section of my site. I began with the base as you see pictured here
it is made of 1/4 inch plywood and has a piece of plexi-glass on top for the 1/8 inch raised edge. I should have taken a
picture or two of it as I was making it but I forgot.
Here I am trying to make a green sand mold. I was not going to pour tonight. I just wanted to try the molding
process to see how it went :) I quickly found out that my crappy sand box was entirely wrong. I need to build a real one!
This will do for my playing tonight however.
I could not get the damn core to come out properly so I had to pack them individually then set them on the spot where they
would normally stand. It worked well and allowed me to move forward :)
It is now a new day. In fact several have passed :) I took pictures of my REAL sand box being created so you
can see those in my Foundry Project if you like. Since they
are part of my foundry and not the lathe, the pictures are not here. But you can now see part of the finished sand box in
this picture. It is much nicer and able to hold probably 300 - 400 lbs without a problem. It is very sturdy.
Here I am getting ready to pour the 2 molds... just skimming some dross.
Not anything really dirty, but it can't hurt to remove it
Click Here to Re-Display the Main Project Page
This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v5.41
WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!
Click Here to go to our Discussion Boards ...Discuss all sorts of cool stuff!
Please consider donating to help support this website!
Donations Received (updated every few days): $933 |...................................| Shop Donations Goal: $35000